It is important to utilize extra caution when using a rough terrain scissor lift. Operators must be completely aware of the surrounding environment. Long booms on the equipment act as levers from the drive units center. For example, a 6 inch bump can lead to a 3 foot bounce when the operator is at the driver controls. Take into account all other traffic nearby, because they might not know that you are moving. Plan your assent carefully. Park the boom lift on a flat surface which has no water or mud. These areas conceal deep potholes that could be possibly cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, fully extended. Be sure to just utilize wooden chalk blocks that are approved.
Several lifts would operate from the end of the boom on a metal platform. Extended booms act levers on the drive unit. While you are at the driver controls, a 6-inch bump could lead to a 3-foot bounce. Consider all other traffic. They may not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas can cover deep potholes in which the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, fully. Place just approved wooden chalk blocks underneath the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious danger for lift drivers regardless of what lift is being utilized. For example, if the operator of the platform is not being aware, or if the platform is being controlled by ground workers which is not able to correctly access proximity to wiring and therefore, either the worker or the platform itself can be easily brought into contact with electrical wires. The worker can be electrocuted unfortunately unless correctly insulated.